PCB Studio
Describe a circuit board in one sentence; the AI draws, places and routes it, you power it up to try it, then export KiCad and Gerber files.
Write one sentence about the board you want. The AI picks the parts, draws the schematic, then places them on a two-layer board and routes it track by track while you watch. Before anything is made, you power the board up and try it.
What you can do:
- Describe a board in one sentence, such as "a USB night light that turns on in the dark, with a knob for the brightness", and watch the parts appear, find their places and get wired. - Open the ready example board or the button-and-LED starter board and try everything without generating a board. - Power the board and work it with the mouse: hold buttons, flip switches (the board shows whether side A or B is connected), turn knobs, darken the light sensor or warm the thermistor, and watch the LEDs light with the current the simulator works out. - Read problems in plain words on the board, such as an LED with no resistor or a dimmer knob that only lights up at the end of its turn, together with what to change. - Change the board with another sentence, or by hand: edit values, drag parts and route again. - Look at the board in 2D and 3D, and read the schematic at a size you can read, scrolling when it is large. - Ask the chat on the right what a part does, why the circuit does not work, or which file goes to the board maker. - Export one zip with a KiCad 8 project, Gerber and drill files for the board maker, and BOM and placement files for assembly. The files carry your board's name, Chinese included.
What it needs: TopxAI desktop 1.57.0 or later and a model you can use in TopxAI. When you generate or change a board, your sentence goes to the model you pick, and for a change so do the current board's parts and connections. A new board takes two requests, and one or two more when the app sends a problem back to be fixed. The chat may search the web for part numbers and datasheets. Boards are saved on this computer, and exports are written only where you save them.
Limits:
- Parts come from a built-in catalogue of 53 common parts. Boards have two layers and up to about 40 parts. - The simulator does not run microcontroller programs. You set a microcontroller's output pins high or low by hand. - It does not design anything that connects to the mains or runs above about 36 V. - The AI can make mistakes. The checks catch the common ones, not all of them, so look the board over before you order it.
What it can use
models.invokeagent.chatfiles.writetoolset:web
Install
Open it in TopxAI Desktop: get it on this page, then choose Open in TopxAI Desktop. The app opens in a new window.
Versions
1.0.1 · Every version is reviewed by TopxAI before it is published.
Other languages: 简体中文